Emergency Alerts
Emergency Alerts shows FEMA IPAWS broadcasts — the same system behind AMBER Alerts and severe weather warnings — on your displays automatically. No one at your organization triggers these; a background job polls IPAWS every 2 minutes and pushes anything matching your store’s county straight to the display. This is separate from Alerts, which your staff send manually.
What has to be true for an alert to reach a display
Section titled “What has to be true for an alert to reach a display”- Your account’s IPAWS feed is turned on. This is a platform-level setting, not something you control per store.
- Your store has a county FIPS code on file — this is derived from your store’s address, so an address that can’t be geocoded means no county match and no alerts.
- The design currently running on the display has Emergency Alerts turned on (below).
Turning it on for a design
Section titled “Turning it on for a design”- Open the Design in the editor.
- Click the gear icon (Design settings).
- Turn on the Emergency Alerts switch.
- Save.
Any display running this design will show IPAWS alerts that match your store’s county. There’s no per-design auto-dismiss setting — see Priority levels below.
What triggers an alert
Section titled “What triggers an alert”IPAWS alerts carry a FEMA/CAP severity, which maps to one of the same priorities used by Alerts:
| IPAWS severity | Priority shown |
|---|---|
| Extreme, Severe | Emergency (full-screen takeover, 90s) |
| Moderate | Warning (overlay, 60s) |
| Minor, Unknown | Info (banner, 30s) |
IPAWS alerts use the same presentation and the same fixed, non-configurable auto-dismiss times as custom alerts; a viewer can also dismiss one early with the close button. IPAWS has no All Clear priority — an area returns to normal once the alert’s own expiration passes or it’s dismissed.
CAP (the protocol IPAWS alerts are published in) categorizes alerts as Geophysical, Meteorological, Safety, Security, Rescue, Fire, Health, Environmental, Transportation, Infrastructure, CBRNE, or Other — whatever categories FEMA is broadcasting for your county is what you’ll see; there’s no filter to limit it to specific categories.
Troubleshooting
Section titled “Troubleshooting”No alerts are appearing, ever. Three things have to line up: the platform-level IPAWS feed must be enabled (check with support if you’re not sure), your store needs a valid address so it has a county FIPS code, and the design the display is running needs Emergency Alerts switched on. Also, alerts only reach active displays — an offline display won’t receive anything.
Alerts seem slow to show up. IPAWS is polled every 2 minutes (FEMA’s recommended rate), so expect up to that long between FEMA issuing an alert and it reaching your displays.
